Why Ring Height Matters for Your 30mm Scope
Matching the ring height to your scope and rifle setup affects both comfort and accuracy. If the rings are too low, the objective bell may contact the barrel or rail. If they are too high, you may struggle to get a proper cheek weld. The AluTech 2er Set 30mm Ringmontage for Weaver/Picatinny rails offers three distinct height options to accommodate different scope diameters and mounting preferences.
All rings in this set share a 30mm tube diameter compatibility and a sturdy Duraluminium construction with steel screws and anti-slip inserts. The key difference is the height, which determines how far above the rail the scope sits.
AluTech 30mm Ring Height Specifications
- AluTech 2er Set - 30mm Ringmontage m. Schraube für Weaver/Picatinny - Höhe nach Auswahl: Low rings have a 6 mm height between the ring underside and the rail top surface, with a total height of 44 mm. Low rings keep the scope close to the rail, ideal for smaller objective lenses and a lower cheek position.

AluTech 2er Set - 30mm Ringmontage m. Schraube für Weaver/Picatinny - Höhe nach Auswahl - AluTech 2er Set - 30mm Ringmontage m. Schraube für Weaver/Picatinny - Höhe nach Auswahl: Medium rings have a 12 mm height between the ring underside and the rail top surface, with a total height of 49 mm. Medium height is the most versatile choice, offering clearance for most standard scopes without raising the sight line too much.
- AluTech 2er Set - 30mm Ringmontage m. Schraube für Weaver/Picatinny - Höhe nach Auswahl: High rings have a 23 mm height between the ring underside and the rail top surface, with a total height of 60 mm. High rings provide extra clearance for large objective lenses or when using additional accessories like lens covers or sun shades.
How to Select the Right Ring Height
Follow these steps to determine which height works best for your setup. You will need your scope's objective bell diameter and the distance from your rail to the barrel or action.
- Measure your scope's objective bell diameter: The outer diameter of the objective lens housing determines how much clearance you need above the barrel or rail. Larger objectives require taller rings.
- Check the rail-to-barrel clearance: Place the scope on the rail (without rings) and measure the gap between the objective bell and the barrel or rail. You need at least the clearance specified in the product instructions.
- Compare with ring height options: Use the AluTech height values: low (6 mm rise), medium (12 mm rise), or high (23 mm rise). Choose the height that gives you the needed clearance while keeping the scope as low as possible for a natural cheek weld.
- Consider your cheek rest: If your stock has an adjustable cheek rest, you can use a taller ring and still maintain a comfortable head position. For fixed stocks, a lower ring is usually better.
What the Supplied Information Does Not Cover
The AluTech ring set does not come with specific torque values or installation instructions in the supplied records. For proper mounting, use a torque wrench and follow your scope manufacturer's recommended torque specifications. The steel screws and anti-slip inserts are designed to handle heavy recoil from larger calibers, but correct tightening is essential.
Also, the product is available in three heights, but the exact model you receive depends on your selection at purchase. Verify the height option before ordering.


