返回部落格
產品評論 2026-11-21 Professor Optiken - Zieloptiken, Ferngläser & Reflexvisiere 0 瀏覽

Saulencer Magnetic Suppressor Holder: Sizing & Use

Saulencer Magnetic Suppressor Holder: Sizing & Use

Learn how the modular Saulencer magnetic suppressor holder fits silencers from 35 mm to 61 mm and mounts on any metal surface for secure storage.

What the Saulencer Magnetic Suppressor Holder Offers

The Saulencer is a modular, magnetic suppressor holder designed to keep your silencer secure and accessible. Its strong integrated magnets provide a holding force of about 1,000 grams, allowing it to attach firmly to any metallic surface — whether inside a gun cabinet, on a wall in the armory, or on a radiator for drying.

The holder is built from high-strength plastic and weighs approximately 120 grams. It comes in three colors: black, red, and yellow, so you can match your workspace or personal preference.

Sizing and Modular Design

Practical Use and Mounting

The Saulencer consists of four combinable parts, making it easy to adapt to your setup. The magnetic base attaches to any clean, flat metal surface — no drilling or adhesive required. Once in place, you can slide the suppressor into the appropriate insert and adjust the height as needed.

The holder's self-luminous lettering helps you spot it in low-light conditions, so you won't accidentally leave your suppressor behind. With a total weight of about 120 grams and a holding capacity of roughly 1,000 grams, it can securely hold most standard suppressors without risk of slipping.

What the Supplied Information Does Not Cover

  • Specific surface preparation: While the magnets work on any metal surface, the instructions do not specify whether paint or coatings affect holding strength. For best results, attach to bare or lightly painted metal.
  • Maximum suppressor weight: The holding force is stated as approximately 1,000 grams, but the maximum recommended suppressor weight is not explicitly given. Heavier suppressors may require additional support.
  • Installation on non‑metal surfaces: The Saulencer requires a metal surface for magnetic attachment. No adhesive or screw mounting options are described in the supplied information.

相關文章

Customer Service
首頁
商品
購物車
我的